The hottest test market in 2011 has great opportun

2022-08-12
  • Detail

The test market opportunity in 2011 is huge

compared with 2010, the negative economic factors in 2011 will not intensify, China's economy will be relatively stable, and the market demand of the electronic test and measurement industry will also be the same. For example, the electronic component manufacturing industry has seen some supply exceeding demand, and the shipments of other electronic products also began to rise. Generally speaking, it is on the rise, and the demand will increase significantly

in 2010, there were signs of stability in many fields and markets. Next year, the form of market development will be clearer, and there is a great possibility of rise. In 2011, the industry technology developed faster and the demand was stronger. The previously suppressed demand may be released, and there is a huge opportunity to test the market. In short, 2010 means great opportunities and hopes for the electronic testing and measurement industry. Of course, there are also challenges and competition

adjust multi-level loading, continuously load safely, automatically maintain multi-level experimental force, automatically collect and store data, and draw curves. As the testing and measurement industry tends to be subdivided more and more, the specific subdivision needs will change in different industries, countries, regions, and product lines, so it is necessary to provide corresponding solutions according to the characteristics of industries and regions

for us, the main business opportunities in 2011 are concentrated in the following areas: high-speed computing technology, embedded applications, RF applications, video testing applications, which are also the core businesses that help us make profits (tech communications and tech are independent companies, and there is no communication business involved here). Therefore, in general, we will continue to focus on these areas in 2011

but from the perspective of market segmentation, taking embedded applications as an example, its market is quite wide, from production lines, university education laboratories, consumer electronics research and development, and even many emerging industries (such as green energy, etc.) that are currently invested and encouraged by the state are our target markets. So you can see that we have done well in some traditional fields, but new market changes and demands will also bring us new opportunities and businesses

another example is our video testing business. Our solutions are widely used in the broadcast control room of TV stations. With the establishment of the phased goal of promoting the three integration by the Chinese government and the introduction of the new deal, as well as the successive establishment of local policies and programs, the digital TV industry, including IP video, is expected to usher in further development. Tektronix has a complete solution for IP video. This year, we acquired a company called mixedsignals, and have incorporated the industry's leading sentry content monitoring solution. We believe it will bring us more opportunities next year

on the other hand, if you pay attention to some recent changes of Tektronix, you will find that we acquired four companies in 2010, including the famous BERTScope and sentry, which means that we are now able to provide customers with a more complete set of solutions, and Tektronix is still looking for more acquisition opportunities (quotefromamir); In 2010, we launched more desktop instrument product lines, including power supply, multimeter and frequency meter, expanding our product line and application fields; At the end of 2010, we set up Tektronix service solutions division to maximize the return on customers' investment in testing and measurement. We are positioning ourselves as an integrated service provider for our customers. These changes, as well as the changes that will happen in the future, make us confident in 2011 and even for a long time after

as mentioned above, Tektronix sees huge business opportunities from the testing and measurement market. First of all, we will still focus on our core business. The number of test applications we provide has doubled this year and will double again next year. At the same time, with the continuous enrichment of our product line (including the introduction of new products and solutions and the integration of acquired products), we will expand new markets. In China, it can be seen that it is required to make the jaws symmetrically clamp the samples to some markets that major test and measurement manufacturers are competing for, such as education, government, industry, etc., and tech is no exception

the main demand trends of these application markets are:

high speed computing technology: customers need application solutions that can perform multi standard transmitter, receiver and interconnection tests to meet current and future technical needs. USB3.0, pcie3.0, sata-gen3 and other high-speed serial standards are still the focus of 2011. For example, we see more and more products based on USB3.0 standard launched. Usb-if announced in September 2010 that nearly 120 products meeting USB3.0 specifications have passed the certification test, while on DevCon in Taipei in April, this number is only more than half of the current one. In addition, customers need to verify that high-speed standard design requirements go far beyond conformance testing tools. When the conformance test of the tested device fails, whether the tool can analyze the root cause becomes very critical

embedded system: Tektronix has long served design engineers and launched a comprehensive range of workbench products, ranging from high-performance, mid-range, to basic (low-end) products, including oscilloscopes and function generators. In order to better meet the needs of customers, we also successively entered the power supply, multimeter and frequency meter markets in 2010, and launched a more comprehensive series of core desktop test instruments that can be used together. With the increasing pressure of product launch time and the expectation of higher productivity, embedded design engineers need a set of highly integrated test equipment to speed up product verification, debugging and verification

video testing: with the continuous pursuit of users for the quality of viewing experience, HD and 3D have become the dominant trend in the video market. More and more operators are preparing for full HD broadcasting in the near future when purchasing equipment. For example, many TV stations will favor products that support options to upgrade to hd3g-sdi when purchasing waveform monitors to avoid repeated investment. As for 3D technology, although it may be difficult to popularize to daily TV programs in a short time, its importance as a new selling point in the video market cannot be underestimated. Before the naked eye 3D technology matures, the two markets that are most likely to explode first are 3D animation and 3D games

on the other hand, with the continuous popularization of IP technology and handheld devices, the market demand for IP video and multi format video is also increasing. For example, in the broadcast of the Asian Games, operators hope that users can enjoy full HD programs in the living room and see smooth live videos on the computer, and that users can watch the Games anytime and anywhere through handheld devices. This puts forward higher requirements for the production and quality control of videos in different formats under various transmission modes. In these aspects, as an equipment provider with more than 60 years of experience in video testing, tech already has corresponding solutions

in the field of high-speed computing technology, tech's high-speed serial solution currently adds a BERTScope error code analyzer, which now includes a full set of solutions such as oscilloscope, signal source, logic analyzer, error code analyzer, probe and software fixture. With the increasing data rate of high-speed serial design, the margin of the measurement system has become a crucial factor. For any digital oscilloscope, there is a close relationship between the sampling rate and the internal noise, that is, the sampling rate is high and the noise is low, so the user can obtain a larger measurement margin

in mid October 2010, we announced the dpo/dsa/mso70000c series of digital and mixed signal oscilloscopes, which can now provide 100gs/s sampling rate performance. A large number of comparative tests show that the noise of dpo/dsa/mso70000c series with a sampling rate of 100gs/s is 20% lower than that of the same instrument with a sampling rate of 50gs/s. While reducing noise, increase data points on the 20GHz bandwidth with 5x oversampling rate. Providing the best oversampling performance in the world for high bandwidth oscilloscopes is of great significance for practical applications, including more accurate signal integrity measurement. 100gs/s acquisition performance brings more measurement profits to customers, so that they can use it today to increase the performance level of their design and reduce manufacturing costs

in the field of embedded systems, tech has long served design engineers and launched a comprehensive range of workbench products, ranging from high-performance, mid-range, to basic (low-end) products, including oscilloscopes and function generators. In order to better meet the needs of customers, we also successively entered the power supply, multimeter and frequency meter markets in 2010, and launched a more comprehensive series of core desktop test instruments that can be used together. With the increasing pressure of product launch time and the expectation of higher productivity, embedded design engineers need a set of highly integrated test equipment to speed up product verification, debugging and verification. In 2010, Tektronix upgraded the world's most popular oscilloscope, launched tds1000c-sc and TDS2000C panda crystal color C series basic oscilloscopes, and provided new functions such as data recording and limit testing for improving production efficiency, as well as 16 new automatic measurement projects for accelerating analysis speed

in the field of RF testing, the evolving digital wireless communication technology makes the radio frequency environment increasingly complex and the spectrum more crowded, which brings unprecedented challenges to the monitoring and management of the spectrum. Effective means and testing tools must be used to complete this task. The method that has been used in the past is to combine the use of desktop spectrometer, handheld spectrometer, oscilloscope and PC offline analysis software to realize the management of known signals and complete the identification of unknown signals and geographical location identification. Desktop spectrometer is often unable to be used in outfield due to the constraints of power supply and harsh test environment; Portable spectrometers are often limited by indicators and their own functions and cannot detect illegal signals. Offline PC analysis software cannot mark the necessary information needed on site in real time

Tektronix H600 adopts Tektronix patented DPX real-time spectrum technology, which can observe co frequency interference in real time. DPX real-time spectrum technology is a digital fluorescence technology, which superimposes multiple spectrums in a certain period of time, and uses color to represent the frequency of different signals, which can intuitively display the signal changes in the frequency domain. H600 displays 10000 spectra per second, so it can capture transient signals with a display time of no less than 125 s with a 100% probability of listening in the frequency domain, which is 200 times faster than the general sweep spectrometer. When observing the same frequency signals, as long as the frequencies of several same frequency signals are different, these same frequency signals can be distinguished by using DPX real-time spectrum technology, which is difficult to achieve in the traditional swept frequency spectrometer

in the field of video testing, sentry, a comprehensive digital content monitoring solution for cable, telecom, IPTV, DTV and other video service operators under the three convergence, has joined the tycoon video product family. Its unique functions and flexible characteristics can help video service operators detect, diagnose and repair various video and audio faults in the transmission network in the early stage of the problem

the widely acclaimed Tektronix wfm8300 Series High-Performance waveform monitor is an ideal solution for video and audio monitoring in a multi format environment. It provides various video and audio options, which are flexible and convenient to configure, and can be installed and upgraded on site. It can be used in analog video, SD, HD, 3g-sdi and other video formats

Copyright © 2011 JIN SHI